Skip to main content

How To Make Fire Alarm At Home With BC547 | Fire Detector Alarm System


How to make fire alarm at home with bc547, fire detector alarm system for science project very simple circuit with fire alarm circuit diagram. You can use this fire alarm for any fire emergency purpose.
Labels:

Comments

Post a Comment

Popular posts from this blog

Clap On Off Switch Circuit Using Arduino

  Arduino Clap LED program #define MicAO 8 int ledPin = 13; int clap = 0; long detection_range_start = 0; long detection_range = 0; boolean status_lights = false; void setup() {   pinMode(MicAO, INPUT);   pinMode(ledPin,OUTPUT);   } void loop() { int status_MicAO = digitalRead(MicAO); if (status_MicAO == 0) { if (clap == 0) { detection_range_start = detection_range = millis(); clap++; } else if (clap > 0 && millis()-detection_range >= 50) { detection_range = millis(); clap++; } } if (millis()-detection_range_start >= 400) { if (clap == 2) { if (!status_lights) { status_lights = true; digitalWrite(ledPin, HIGH); } else if (status_lights) { status_lights = false; digitalWrite(ledPin, LOW); } } clap = 0; } }
Post a Comment
Read more

Obstacle Avoiding Robot Car Using Arduino - How To Make a Smart Car

How To Make Smart Robot Car With Arduino Obstacle avoiding robot car using Arduino, how to make a smart car with ultrasonic sensor, servo motor, and L298N motor driver module. Arduino UNO :- https://amzn.to/3MF9jky SG90 Servo Motor And HC-SR04 Ultrasonic Sensor :- https://amzn.to/3EX03pu LM298N motor driver module :- https://amzn.to/3y2tx3Y BO Motor with Wheel Pair :- https://amzn.to/38zFMu6 arduino smart car kit :- https://amzn.to/3kmtZlk Project Code :-  #include <Servo.h>          //Servo motor library. This is standard library #include <NewPing.h>        //Ultrasonic sensor function library. You must install this library //our L298N control pins const int LeftMotorForward = 7; const int LeftMotorBackward = 6; const int RightMotorForward = 4; const int RightMotorBackward = 5; //sensor pins #define trig_pin A1 //analog input 1 #define echo_pin A2 //analog input 2 #define maximum_distance 200 boolean goesForward = ...
Post a Comment
Read more

How To Make Radar With Arduino UNO Using Ultrasonic Sensor

  Creating a radar system with an Arduino UNO and an ultrasonic sensor involves a few straight forward steps. First, you'll need to connect the ultrasonic sensor's trigger pin to one of the Arduino’s digital output pins and the echo pin to a digital input pin. Then, write a simple Arduino sketch to send a pulse from the trigger pin and measure the duration of the pulse received on the echo pin. This duration, proportional to the distance of an object from the sensor, can be calculated using the speed of sound. By continuously taking readings and mapping them to distances, you can plot these measurements to visualize objects in your environment, effectively creating a basic radar system. To display the results, you could use a serial monitor or even integrate an LCD display for real-time feedback. Here is the code below ,- //radar.ino #include <Servo.h>  const int trigPin = 9; const int echoPin = 8; long duration; int distance; Servo myServo;  void setup() {   p...
Post a Comment
Read more