Skip to main content

5 Cheapest Drone On Amazon Under 2000



if you are a drone lover or want to gift someone then this article is for you I discuss about list of 5 best quadcopter under Rs. 2000 on Amazon India. So, let’s talk about it.
1. HX 750 Drone Quadcopter :-

HX 750 drone quadcopter comes with white color body and its built quality is very good. It is the cheapest good training drone without camera for beginners. This drone also have 360 degree roll over feature,  previous WSAD was too boring but now the new 3D rolling special effects surprise all the people. It also comes with 2.4G 6 Axis Gyro Technology and give you flight time 5-10mints and it depend if you do more stunts. This product also comes with 3 speed gear modes with blinking LED lights. This drone is perfect for Kids or beginners for practice step by step. It also comes with 1 220mah Lipo battery. It is very light weight of 345g and orients your drone according to your controller. It also comes with extra 2 propellers ,one lipo battery and USB charger.


2. LHX 7/4 Quadcopter:-
LHX 7/4 Drone comes with 6-Axis Quadcopter without camera. It will work fly for 2-3 minutes at a full charge of 30 minutes and its flying height under 30 meters. It is very light weight of 370 grams and orients your drone according to remote controller. This drone comes with 3-speed modes for improved drone controls. It also has LED lights on the bottom for improved visibility in low light conditions. This product also comes with 2.4 GHz remote control system with advanced spread spectrum technology. It is good for training purpose for beginners.


3.  LH-X16 Drone Quadcopter :-


This drone comes with two color variant blue or orange and builds with plastic body. This RC quadcopter comes with 2.4GHZ technology 6 channel 6 axis gyroscope with one key return facility with blinking LEDs. It also comes with 360 degree roll over and headless mode features without camera, but you can attach camera with it. The Flying range of this drone is less than 20 metres and flight time 4-5 munities. In the box you will get 4 stands, one screw driver, one 350mah lipo battery, one lipo battery charger and two propellers.


4. Spiderman Quad Drone:-
This Quad Drone comes with two types of variant captain America with black color and another is Spiderman with red color theme. It also comes with 2.4 ghz gyro helicopter drone without camera. It has headless mode,one key return and wind resistance features. It will work fly for 8-12 mins at a full charge of 40 minutes and it has usb charging facility. This drone also comes with 6 axis gyroscope. Its flying Height Under 20 Meters approx. It is very light weight of 0.42 kgs and orients your drone according to remote controller. It comes with 2 stands, one 380mah lipo battry, 1 USB charger and a remote controller. So, it is very comfortable to fly for children.


5. Baybee Lightning RC Quadcopter Drone :-

Baybee Lightning RC Quadcopter Drone comes with two color variant white and Orange and it is the very cheapest Indore fly drone without camera. It has 360° roll over stunt flips function which surprise all the people. This product also comes with LED Lights for low light situations. In the box you will get a USB charger cable,4 extra propellers and 2.4 ghz remote controller. It’s flying height under 25 meters and flight time 6 munities. It is very light weight of 250g. It also comes with 6 axis gyro technology. So, it is good product for beginners. 
Labels:

Comments

Post a Comment

Popular posts from this blog

Obstacle Avoiding Robot Car Using Arduino - How To Make a Smart Car

How To Make Smart Robot Car With Arduino Obstacle avoiding robot car using Arduino, how to make a smart car with ultrasonic sensor, servo motor, and L298N motor driver module. Arduino UNO :- https://amzn.to/3MF9jky SG90 Servo Motor And HC-SR04 Ultrasonic Sensor :- https://amzn.to/3EX03pu LM298N motor driver module :- https://amzn.to/3y2tx3Y BO Motor with Wheel Pair :- https://amzn.to/38zFMu6 arduino smart car kit :- https://amzn.to/3kmtZlk Project Code :-  #include <Servo.h>          //Servo motor library. This is standard library #include <NewPing.h>        //Ultrasonic sensor function library. You must install this library //our L298N control pins const int LeftMotorForward = 7; const int LeftMotorBackward = 6; const int RightMotorForward = 4; const int RightMotorBackward = 5; //sensor pins #define trig_pin A1 //analog input 1 #define echo_pin A2 //analog input 2 #define maximum_distance 200 boolean goesForward = ...
Post a Comment
Read more

How To Make Radar With Arduino UNO Using Ultrasonic Sensor

  Creating a radar system with an Arduino UNO and an ultrasonic sensor involves a few straight forward steps. First, you'll need to connect the ultrasonic sensor's trigger pin to one of the Arduino’s digital output pins and the echo pin to a digital input pin. Then, write a simple Arduino sketch to send a pulse from the trigger pin and measure the duration of the pulse received on the echo pin. This duration, proportional to the distance of an object from the sensor, can be calculated using the speed of sound. By continuously taking readings and mapping them to distances, you can plot these measurements to visualize objects in your environment, effectively creating a basic radar system. To display the results, you could use a serial monitor or even integrate an LCD display for real-time feedback. Here is the code below ,- //radar.ino #include <Servo.h>  const int trigPin = 9; const int echoPin = 8; long duration; int distance; Servo myServo;  void setup() {   p...
Post a Comment
Read more

How To Make Simple Digital Clock Using Arduino UNO Very Easy Step By Step

Digital clock using Arduino UNO , TM1637 4-digit 7 segment display and DS1307 RTC module. Here I show you how to make a simple digital clock using Arduino UNO very easily.  TM1637 4-digit 7 segment display :-  https://amzn.to/3R3KC3p DS1307 RTC module:-    https://amzn.to/3dPDfyc    Arduino UNO:- https://amzn.to/3KcNfxR Jumper Wire:-    https://amzn.to/3KcBIyH             Project Code :-  const int clock = 11; const int data = 10; uint8_t digits[] = { 0x3f, 0x06, 0x5b, 0x4f, 0x66, 0x6d, 0x7d, 0x07, 0x7f, 0x6f }; void setup() { setupInterrupt(); pinMode(clock, OUTPUT); pinMode(data, OUTPUT); start(); writeValue(0x8c); stop(); write(0x00, 0x00, 0x00, 0x00); } byte tcnt2; // set current time by editing the values at line 16 and 17 unsigned long int setMinutes = 9; // set minutes unsigned long int setHours = 9; // set hours unsigned long time = (setMinutes * 60 * 1000) + (setHours * 3600 *10...
Post a Comment
Read more