Skip to main content

Worlds Most Costly Mobile - Solarin Phone 10 Features ( $20,000 SMARTP...





1. According to the company, Solarin is the world's most secure Android smartphone.

 Outside the agency norms, Sirin Labs claims to provide the most advanced privacy technology,

currently unavailable in the consumer technology sector. The smartphone has 256-bit level of

somewhat reminiscent of the defence techniques



2. The Solarin smartphone runs on the Qualcomm Snapdragon 810 processor, clocked at 2 GHz. The SD 810 processor is the company's 2015 flagship and has been quite infamous for heating and lag issues. The smartphone, thus, comes with support for

all 24 bands of 4G LTE.





3. With a 23.8 MP rear camera sensor, the Solarin packs in a strong camera with features

like laser autofocus, four-tone LED flash and HDR mode. The front camera has an 8MP camera sensor

 with features like a front-facing flash and electrical image stabilization.



4. The Solarin is definitely not the sleekest and lightest smartphone out there.

Weighing in at 250 grams and having a width of 78mm, the smartphone needs to join

the gym to compete with the mighty flagship smartphones of the contemporary age.



5. Keeping up with 2016 flagships finally, the Solarin manages to fit in a Quad-HD display,

with a resolution of 2560x1440 pixels. With a 5.5-inch IPS panel, equipped with Gorilla Glass 4,

the Solarin is expected to have a bright and vibrant display.



6. The Solarin has around 128GB of non-expandable storage, along with 4GB of RAM.

It also packs in a 4,000 mAh battery unit under the hood, enabling an average usage of 2 days on

a single full charge. With a standby time of over 2 weeks, the Solarin can charge up pretty fast with Qualcomm Quick Charge 2.0 support.



7. Dropping the idea of plain, default color options;

Sirin Labs has decided to go with innovative new variants for the Solarin.

The smartphone comes in four-color options - Black Carbon Leather with Titanium,

Fire Black Carbon Leather with Yellow Gold, Crystal White Carbon Leather with Diamond

Carbon and Fire Black Carbon Leather with Diamond Carbon. Now, that's quite a range!



8. The Solarin manages to fit in some neat water and dust resistant ratings as well,

 to improve upon the overall sturdiness and durability of the smartphone. It is powered by a heavily

customized skin based on Android 5.1.1 Lollipop.



9. As discussed above, the Solarin was developed by an Israeli startup,

 Sirin Labs. Founded in 2013 by Kazakh investor, Kenges Rakishev, the company

is currently headed by Tal Cohen (CEO) and Moshe Hogeg (President). Sirin Labs plans to scale up production levels in the future.



10. The Solarin smartphone will be available at a price of USD 14,000 or Rs. 9 lakh approx.

It is currently only available at the company's London flagship store. It will also go on sale

at Harrod's chain of stores starting June 30. The Solarin will touch North American and Asian markets later this year.

Comments

Post a Comment

Popular posts from this blog

Obstacle Avoiding Robot Car Using Arduino - How To Make a Smart Car

How To Make Smart Robot Car With Arduino Obstacle avoiding robot car using Arduino, how to make a smart car with ultrasonic sensor, servo motor, and L298N motor driver module. Arduino UNO :- https://amzn.to/3MF9jky SG90 Servo Motor And HC-SR04 Ultrasonic Sensor :- https://amzn.to/3EX03pu LM298N motor driver module :- https://amzn.to/3y2tx3Y BO Motor with Wheel Pair :- https://amzn.to/38zFMu6 arduino smart car kit :- https://amzn.to/3kmtZlk Project Code :-  #include <Servo.h>          //Servo motor library. This is standard library #include <NewPing.h>        //Ultrasonic sensor function library. You must install this library //our L298N control pins const int LeftMotorForward = 7; const int LeftMotorBackward = 6; const int RightMotorForward = 4; const int RightMotorBackward = 5; //sensor pins #define trig_pin A1 //analog input 1 #define echo_pin A2 //analog input 2 #define maximum_distance 200 boolean goesForward = false; int distance = 100; NewPing sonar(trig_pin
Post a Comment
Read more

How To Make Radar With Arduino UNO Using Ultrasonic Sensor

  Creating a radar system with an Arduino UNO and an ultrasonic sensor involves a few straight forward steps. First, you'll need to connect the ultrasonic sensor's trigger pin to one of the Arduino’s digital output pins and the echo pin to a digital input pin. Then, write a simple Arduino sketch to send a pulse from the trigger pin and measure the duration of the pulse received on the echo pin. This duration, proportional to the distance of an object from the sensor, can be calculated using the speed of sound. By continuously taking readings and mapping them to distances, you can plot these measurements to visualize objects in your environment, effectively creating a basic radar system. To display the results, you could use a serial monitor or even integrate an LCD display for real-time feedback. Here is the code below ,- //radar.ino #include <Servo.h>  const int trigPin = 9; const int echoPin = 8; long duration; int distance; Servo myServo;  void setup() {   pinMode(trig
Post a Comment
Read more

How To Make Simple Digital Clock Using Arduino UNO Very Easy Step By Step

Digital clock using Arduino UNO , TM1637 4-digit 7 segment display and DS1307 RTC module. Here I show you how to make a simple digital clock using Arduino UNO very easily.  TM1637 4-digit 7 segment display :-  https://amzn.to/3R3KC3p DS1307 RTC module:-    https://amzn.to/3dPDfyc    Arduino UNO:- https://amzn.to/3KcNfxR Jumper Wire:-    https://amzn.to/3KcBIyH             Project Code :-  const int clock = 11; const int data = 10; uint8_t digits[] = { 0x3f, 0x06, 0x5b, 0x4f, 0x66, 0x6d, 0x7d, 0x07, 0x7f, 0x6f }; void setup() { setupInterrupt(); pinMode(clock, OUTPUT); pinMode(data, OUTPUT); start(); writeValue(0x8c); stop(); write(0x00, 0x00, 0x00, 0x00); } byte tcnt2; // set current time by editing the values at line 16 and 17 unsigned long int setMinutes = 9; // set minutes unsigned long int setHours = 9; // set hours unsigned long time = (setMinutes * 60 * 1000) + (setHours * 3600 *1000); void setupInterrupt() { TIMSK2 &= ~(1<<TOIE2); TCCR2A &=
Post a Comment
Read more